User Tools

Site Tools


r6_99-02_r6_swingarm_swap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

r6_99-02_r6_swingarm_swap [2009/02/01 02:59]
71.56.48.81
r6_99-02_r6_swingarm_swap [2009/02/01 14:30] (current)
71.56.48.81
Line 20: Line 20:
   * I had to fab up a new upper shock mount to fit the R6 shock. Once mounted I then   * I had to fab up a new upper shock mount to fit the R6 shock. Once mounted I then
 had to purchase a set of triangle lowering links because the rear end sat up to high had to purchase a set of triangle lowering links because the rear end sat up to high
-and when the kick stand was down it wanted to tip over.+and when the kick stand was down it wanted to tip over. I have seen now they are selling 
 +the turnbuckle style which makes for an easier lowering and no tire removal.
   * A small bracket was made for the master cylinder and brake switch and was also    * A small bracket was made for the master cylinder and brake switch and was also 
 spaced out for clearance and alignment issues. spaced out for clearance and alignment issues.
r6_99-02_r6_swingarm_swap.txt · Last modified: 2009/02/01 14:30 by 71.56.48.81