It won't spark! Now what? (missed a bit)

Moderators: Site Director, FZR Forum Moderators

buzzawak
Level 2.0
Level 2.0
Posts: 201
Joined: Wed Apr 29, 2009 4:09 am
Location: Newcastle, Australia

It won't spark! Now what? (missed a bit)

Postby buzzawak » Wed May 02, 2012 10:31 pm

The spark plug cap has a small spring, resistor and the brass screw (the brass bit is the part that connects to the spark plug top thread.
This bit can become loose (it screws in) and results in burning the top of the contact, spring or resistor.

DonTZ125
Moderator
Posts: 2214
Joined: Tue Dec 02, 2008 11:20 pm
Location: Scarberia, ON
Contact:

Re: It won't spark! Now what? (missed a bit)

Postby DonTZ125 » Wed May 02, 2012 11:08 pm

Added - thanks!

ramster
Site Newbie
Posts: 43
Joined: Mon Apr 02, 2012 1:00 am
Location: USA

Re: It won't spark! Now what? (missed a bit)

Postby ramster » Thu May 03, 2012 9:35 pm

buzzawak wrote:The spark plug cap has a small spring, resistor and the brass screw (the brass bit is the part that connects to the spark plug top thread.
This bit can become loose (it screws in) and results in burning the top of the contact, spring or resistor.


You could even dump the resistor's then replace them with short lengths of 3mm welding rod coated in dialectic grease. Then there's the White inline connector from the Start Relay to the main fuse, it can become corroded :thumbsup:
You can lead a THIRSTY horse to water, you cant make the THIRSTY horse drink, if it don't drink shoot it.


Return to “Electrical: MODs/How-To/Issues”

Who is online

Users browsing this forum: No registered users and 3 guests